N S K E L E C T R O N I C S


Go to content

Main menu:


RENESAS Starter Kit - R8C

RENESAS



For More Updates Visit our New Website www.nskelectronics.in



Renesas Starter Kit for R8C/27

Target Devices - R8C/27 Group

Device Part No. populated on the board: R5F21276SNFP (R8C/27 Group)

Product Overview:

The R8C/27 is based on the R8C CPU Core. Maximum operating frequency is 20 MHz. A Flash Memory Version is available. Internal Flash Memory is programmable on a single power source.

Key Features:

  • 8-bit Multifunction Timer with 8-bit prescaler (Timer RA and RB): 2 channels
  • Input Capture/Output Compare Timer (Timer RC): 16-bit x 1 channel
  • Real-Time Clock Timer with compare match function (Timer RE): 1 channel
  • UART/Clock Synchronous Serial Interface: 2 channels
  • I2C-bus Interface (IIC)/Chip-select Clock Synchronous Serial Interface: 1 channel
  • LIN Module: 1 channel (Timer RA, UART0)
  • 10-bit A/D Converter: 12 channels
  • Watchdog Timer
  • Clock Generation Circuits: XIN Clock Generation Circuit, On-chip OscillatorXCIN Clock Generation Circuit
  • Oscillation Stop Detection Function
  • Voltage Detection Circuit
  • Power-On Reset Circuit
  • I/O Ports: 25 (incl. LED drive ports)
  • External Interrupt Pins: 7


Product Overview

The Renesas Starter Kit for R8C/27 is intended as a user-friendly introductory and evaluation tool for the R8C/27 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and Flashing , using High-performance Embedded Workshop as well as programming the device using Flash Development Toolkit.

The Renesas Starter Kit for R8C/27 may be connected to the host PC using a simple RS232 serial connection (not normally fitted) or via the included USB interface CP2102 USB to uart converter Chip Included on the Board .

The purpose of the board is to enable the user to evaluate the capabilities of the device and its peripherals by giving the user a simple platform on which code can be run only minutes from opening box. It can also prove an invaluable tool in development by providing a useful test platform for code already debugged using one of our more powerful emulation tools.


NSK Starter Kit Features

MAIN FEATURES:

  • USB Powered
  • RS232 Tx, Rx interface with MAX232 IC on socket
  • Quartz crystall 20.000Mhz
  • Reset button
  • Power plug-in jack
  • Extension slot on every uC pin
  • GND bus
  • Vcc bus.
  • Four mounting holes 3,3 mm (0,13")


I/O Features

  • R5F21276SNFP SMD Chip
  • On board Regulated Power Supply 5v,12v supplys
  • Easy to test with Burg Connecters wires
  • A Serial Port for ISP Programming Thru Flash Development Tool Kit
  • An 2 RS232 Serial Port
  • LCD Display
  • DC Power Supply Connector(12v Ac or Dc)
  • 24Cxx I2C EEPROM
  • RTC DS1307
  • 2 LED array
  • 4 Intruupt Switchesr
  • Example Programs for LED,LCD,RS232 , ADC



Package Content

  • Renesas Development Board ( WITH CHIPS RS232,RTC1307,24c02 , LCD 16X2 )
  • USB cable
  • Software CD( Renesas IDE , Flash Tool kit , Datasheets )




Home Page | NSK PRODUCTS | INDUSTRIAL AUTOMATION & PLC | MINI PROJECTS >>> | 8051 | PIC | AVR | Arduino | ARM 32 Bit | RENESAS | MSP 430 | ARM CORTEX M3 | VLSI - CPLD KITS | UNIVERSAL PROGRAMMERS | Audio&Voice Recognition | GSM & GPRS - GPS | RFID - MIFARE | Wired Communication | Wireless Communication | SENSORS | INTERFACE BRDS | Power Supplies | MOTOR DRIVES | MOTORS | ROBOTICS | PCB - Prototyping | BUY COMPONENTS/TOOLS | ELECTRONIC COMPONENTS | CONTACT US | How To Place Order? | NSK SUPPORT | Site Map


Sub-Menu:

Search

Back to content | Back to main menu