N S K E L E C T R O N I C S


Go to content

Main menu:


Barometric Pressure Sensor

SENSORS



For More Updates Visit our New Website www.nskelectronics.in



Barometric Pressure Sensor Breakout - BMP180

Description: This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. Itís based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the BMP085!

This breadboard-friendly board breaks out every pin to a 5-pin 0.1" pitch header. VCC can be from 1.8V to 3.6V and is I/O lines are 5V tolerant; we typically run it on a clean, regulated 3.3V supply. The analog and digital supplies (VDDD and VDDA) are tied to a single header pin, but are separately decoupled. It connects to a microcontroller via I≤C bus

Home Page | NSK PRODUCTS | INDUSTRIAL AUTOMATION & PLC | MINI PROJECTS >>> | 8051 | PIC | AVR | Arduino | ARM 32 Bit | RENESAS | MSP 430 | ARM CORTEX M3 | VLSI - CPLD KITS | UNIVERSAL PROGRAMMERS | Audio&Voice Recognition | GSM & GPRS - GPS | RFID - MIFARE | Wired Communication | Wireless Communication | SENSORS | INTERFACE BRDS | Power Supplies | MOTOR DRIVES | MOTORS | ROBOTICS | PCB - Prototyping | BUY COMPONENTS/TOOLS | ELECTRONIC COMPONENTS | CONTACT US | How To Place Order? | NSK SUPPORT | Site Map

Search

Back to content | Back to main menu